Tz - P

High-performance single-module tool head with (tangential/z-axis controlled) cutting module and attached pen module. Tz - T - P

High-performance dual-module cutting head (tangential/z-axis controlled), with attached pen module.

Also available as Tzs-T-P20 with extended stroke for machines with 60mm/2.36” clearance. Tz - 2T - P

High-performance triple-module cutting/scoring head (tangential/z-axis controlled), with one 40mm module, two 20mm modules) and attached pen module. Tz-P20-No

Triple function cutting/punching head with tangential/z-axis controlled cutting module, dual punch modules, and attached pen module. Tz-R45-P

Tz-R45-P (shown): Cutting/routing head with (tangential/z-axis controlled) cutting module, 150W or 450W router spindle, and attached pen module.

R-45-P: Same as Tz-R45-P but without cutting module (for routing/plotting applications only) T75-P

T75-P (shown): Dual function cutting head with one large tangentially controlled cutting module for straight and angle cuts, with attached pen module.

- available with adapter for various tool inserts
- cuts at angles up to 15 degrees (see also V-cut tool below)
- T75-module also accommodates the V-cut tool for cutting thicker POP/POS materials (e.g. X-board, Re-board, Kappa, corrugated cardboard, etc.) at a 45-degree angle for display applications.

Tz-T75-P: Same as above but with additional tangentially controlled cutting module. V-cut

V-cut tool for cutting thicker POP/POS materials (e.g. X-board, Re-board, Kappa, corrugated cardboard, etc.) at a 45-degree angle for display applications.

Tz-T75-P: Same as above but with additional tangentially controlled cutting module. Tzs-P20

Same as Tz-P above but with extended, 60mm/2.36” stroke for cutting up to 50mm/2” thick, soft materials, e.g. foam, filter materials. For machines with extended clearance only. R45s-P20

1kW routing head with attached pen module.  Capable of routing up to 2” thick materials on machines with extended, 60mm/2.36” clearance (up to max. 1” on machines with standard 30mm/1.18” clearance). Tz-R45s

Z-axis controlled tangential module with 1kW routerhead. Tzs-R45s

Combination 1kW routing/cutting head with (tangential/z-axis controlled) cutting module and 1kW router spindle. Capable of cutting/routing up to 2” thick materials on machines with extended, 60mm/2.36” clearance.

Also available as Tz-R45s for cutting/routing up to max. 1” on machines with standard 30mm/1.18” clearance.
Explanation of Abbreviations used in Tool Head designations

TZ Tangential module - z-axis controlled
RZ Router - z-axis controlled
P20 Pen module with 20mm stroke
TZS Tangential module, z-axis controlled, with 60mm / 2.36” stroke
NO+ Notching/punching module